Why You Should Trust Your Double Glazing Repairs to Local Experts
Replacing double-glazed windows is not a DIY job however a glass specialist can make it easy and safe. It's also worth checking with the company you bought it from if it is still covered by warranty.
Misted windows can be made to drill to let out condensation, but this is only a temporary solution. Double glazing that has blown must be replaced in order to restore the thermal efficiency.
Broken window panes
When a window's pane is damaged, it leaves a gap in the double-glazing which can lead to draughts or moisture. These aren't only inconvenient however, they can also harm your home and health. The damp conditions can lead to rotted frames, structural problems and other costly repairs.
But, a damaged pane is often an easy fix when you know how to fix it properly. Wear a pair of gloves and eye protection to protect yourself. Then, remove the glass shards that were left. Make use of a utility blade to cut through any metal glazing points and glazing putty when you have removed all the shards. Once the glass has been removed from the frame, remove it with care.
After you have cleaned and sanded the area to remove any gunk or paint, it's time to prepare the space for the new glass. Measure the opening from top to bottom, and from side to side. Subtract 1/8 inch to allow for any expansion and contraction of the frame. This will ensure the glass is correctly installed.
Next, apply a cord of glaziers compound to the outside edge of your glass frame. Smooth it out using a putty knife, and match the colour of the frame. Once the compound is dry and you are able to paint the compound and the new pane to match the rest of the window.
To stop the crack from traveling, score small arcs with your utility knife just beyond the crack. This will curtail the crack and prevent it from spreading, which will save your window from the necessity of replacing it.
Although you may be tempted to try and make your own repairs but this is extremely difficult without the right tools. It is safer and more convenient to call a company who specializes in repairs to local double-glazing. This will not only save you a lot of trouble, but it will also ensure that your double glazing is repaired professionally to the highest standards.
Broken seals
A leaky seal can cause your windows to lose their insulating properties, leading to drafts and a higher cost for energy. This lets humidity and moisture into the space between window panes causing condensation and fogging. Foggy windows can be difficult to live with, and the problem will only get worse over time if it is not taken care of.
You can prevent the seals on your windows from breaking by having your windows professionally installed and avoid cleaning your windows with power. However, even if your windows are in good condition it is important to have the window seal repaired when you spot any indication of a break, such as condensation between the glass panes or a noticeable increase in your energy bills.
The window seals are made of flexible materials that could be damaged over time. Older windows are more prone to suffer this problem, as are windows that have been exposed to excessive sunlight. Window seals may also fail if there are problems with the installation like gaps or frames that are uneven.
While it is possible to repair the seal that is broken on your windows, the process can be complex and damage other components such as argon within the window. It is recommended to contact an experienced glazier to examine your windows and fix any worn or damaged seals.
Once the window seal is replaced, your double-glazed will perform as it should, protecting your home from heat loss and cold air infiltration. This will help you save money on cooling and heating while keeping your home comfortable.
In most cases, fixing a broken window seal requires removal of the window from its sash, and then removing the old sealant. When the window is clean and ready to be put back in then it is refilled with argon gas before being sealed once more. While it is possible to do this on your own, it is recommended to call a professional glazier to ensure that the job is done properly and safely.
Broken door handles
The handle of the front door of your house is an essential element of your security. It lets you open the door, and also hooks into a latch that's fitted into a slot within the frame of the door to keep the door closed. If the handle is loose, this can cause you to have trouble opening the door. It could be an indication that your locking mechanism isn't working properly.
It is easy to fix a loose handle on doors. In the majority of cases, you can tighten the screw holding it in place. If the problem is more serious then you may need to replace the handle.
To begin, you'll need to wedge your door open using a door wedge or stop so that it doesn't shut while you work on the knob or handle. This will prevent the paint from getting damaged and will allow you to access all parts of the doorknob handle without worrying about the latch.
The next step is to take off the coverplate that is positioned over the door handle. This might look like a round or rectangular piece of plastic that's designed to conceal the screws for a more attractive appearance. Some may have a tiny slot or detent which you can make use of a flathead screwdriver to press down to open it. Then, you'll have to pull the base of the handle off and reveal the screws that hold it in place.
The cover plate hides the majority of the screws that hold your door knob or handle in place. After you remove the cover plate, you will be able to easily see all of the screws and tighten as necessary. You don't want to over-tighten the screws as it could damage the knob or handle. Once the screws are tightened, you can replace the base and place the knob or handle on the top. Make sure that the holes on the handle or knob line up with the detent holes or screw holes. Check the handle after you're done to ensure it works correctly.
Chips and scratches
Even the best maintained double glazing can be damaged. Cracks or chips could be caused by stray balls or a sudden wind gust. These damages can have a negative impact on the performance of your doors and windows which will require them to be replaced. It is important to recognise the signs of damage and contact your installer as soon as possible, preferring to do so in writing. You can help by providing information about the issue and pictures as appropriate.
It may be possible to repair chips or scratches without much difficulty, depending on their severity. If a scratch is severe enough to be felt with your fingernail, however it is best to get an expert glazier, since they can use glass polish and some elbow grease to eliminate the scratch. They will also be able to offer some tips for maintaining your windows and doors, to keep them in good condition.
Be on the lookout for indications of gas leaks in the space between your windowpanes. If you notice that condensation is forming between the panes, it could be that the gas used to insulate has evaporated and warm air is making its way into your home. double glazing Woodley is important to contact your installer as soon as you spot this issue, as it may be covered by your warranty.
If your double-glazed windows are covered by a guarantee, you are able to claim any repair costs. It is also possible to switch to a different installer who can be trusted to provide high-quality products and excellent customer service. You can check online reviews, go through the BBB and ask for references from past customers to ensure that you select an installer with a solid reputation for professionalism and quality. It is also important to inquire about certifications from major manufacturers and the Fenestration and Glazing Industry Alliance. This will enable you to avoid companies that aren't authorised to install your double glazing.